Stainless Steel BANDS
Range and Possibilities
Stainless steel strips in a wide range of thicknesses and widths – for stamping, bending, springs, decorative and technical elements. Deliveries in accordance with European standards and quality control.
- Thicknesses: 0.08–3.0 mm
- Widths: 6–1500 mm (cut from coil)
- Surfaces: 2B, BA/2R, 2H (work hardened)
- Edges: cut, deburred, rounded
- Standards: EN 10088-2 (flat products), EN 10151/ISO9445-1 (spring strips)
Applications
- Household appliances and food industry: housings, strips, food contact elements, baskets and shelves (BA/2R, 2B).
- Springs and elastic elements: 2H / hardened tapes.
- Seals, washers, clamps: precise cutting in narrow widths.
- Construction / Architecture: Finishing elements, covers, facades.
- Automotive: Covers, elastic clips, mounting tapes.
- Electrical engineering: Elastic contacts, screens, bands.
Grade and typical applications
- 1.4301 / AISI 304 – universal; General purpose components, household appliances, construction.
- 1.4307 / AISI 304L – reduced C content; improved weldability, welded components.
- 1.4401 / AISI 316 and 1.4404 / 316L – increased corrosion resistance (chlorides); chemical/marine industry.
- 1.4310 / AISI 301 AISI 302 – spring grade, clips, ribbon springs.
- 1.4016 / AISI 430 – ferrite; Decorative and technical elements with moderate corrosion requirements.
On request: other grades (e.g., 1.4571/316Ti, 1.4541/321) and hardnesses: annealed, 1/4 hard, 1/2 hard, 3/4 hard, full hard.
Surfaces and Finishes
- 2B – cold-rolled, homogeneous, universal base for further processing.
- BA / 2R – mirror effect, high aesthetics.
- 2H – work-hardened (elastic) for demanding loads.
- Edges: cut or rounded/deburred for safety and better handling.
Dimensions, Tolerances, and Delivery
- Standard dimensions: thickness approx. 0.08–3.0 mm; width approx. 6–1500 mm.
- Tolerances: according to EN 10088-2 or EN 10151/ISO9445-1 (for spring straps).
- Packaging: coils on cardboard or metal cores; Protected edges, batch identification labels.
- Documentation: Certificates of Conformity according to EN 10204/3.1.
FAQ – Frequently Asked Questions
Can you prepare specific widths?
Yes, we cut from coils to the required widths (while maintaining tolerances and the selected edge: cut or rounded).
What are the lead times?
Depends on the species, surface, and hardness. After your inquiry, we will provide current lead times and available stock.